Immersion Heaters

Pipe Insert Heaters

Silicon Mats

Mineral Insulated Heater Cable

Constant Wattage Cable

Heat Loss Formulas

Asphalt Emmulsions Oils Bio-Desiel Vegitable Oil Fuel Oil		Caustic Acids Etches Hazardous Areas Chemical Water and Foods Grade
Fill in Our Tank Heating Questionnaire and Give Us a Call! 901-452-4516
Pipe Insert Heaters for Dip Tank Pipe Insert Heaters for Vertical Tank Pipe Insert Heaters for Oil Tank Vertical Tank Heater	250 KW Circulation Heater Vertical Tank heater Horizontal Tank Heater 8 Inch Flaged Tank Heater	Immersion heater Tank Layout Flanged heater Layout Rainwater Heater

We are Stocking Distributors For Indeeco

Immersion Heaters

INDEECO offers a wide variety of designs for heating gases, liquids and soft metals by direct immersion. Standard units in copper, steel, stainless and Incoloy; custom units in 10 different sheath materials, liquidproof or explosion-resistant terminal boxes, hermetic terminal end seals, high temperature construction and built-in controls. UL Listed and CSA Approved designs are available.
Pipe Thread Heaters.
Pipe Flange Heaters.
Over-the-Side Heaters.
Circulation Heaters.
Cooling Tower Heaters.
Bottom Mounted Heaters.                                To Use Our Tank Heating Wattage Guide Click Here

Constant Wattage Cable like M.I. can be mounted on the out side of the Tank. This system also is only used for Maintaining the tank temperature. Lower temperature applications Easy to Install No contact with the Fluid.

Silicone Rubber Heat Mats

Silicone Heaters are Mounted Outside the tank at the lowest point available. This system is usually only used for Maintaining the tank temperature. But for low temperature appications up to 250 Degrees F we can use these heaters for Raising the Fluid Temperature. Lower temperature applications Very Easy to Install Just Peel and Stick (adhesive Backing No contact with the Fluid.

Tank Heating Using Steam:

Temperature Control Panels We manufacture a complete range of temperature control panels designed for Steam & Electric Heat pre-wired and on our shelf. Our Model# STD-12A103A is Designed specifically for Steam Service and Includes: Digital Temperature Controls High Temp Alarms (Safety Valve Control) Fused Output Asco Steam Rated Solinoid Valves On the Shelf For Quick Delivery Mounted and Tagged to a clearly labeled terminal strip for easy installation.

We also Sell systems using:

• Drum Heaters
• Steam Coils
• Circulation Systems
  • steam
  • heat transfer oils

We also Sell Drums and Drum accessories. Standard Open-Head Steel Drums Stainless Steel Drums Heavy Duty Plastic Drums Polyethylene Drum Faucets

Return to our Home Page